+- tyFlow Forum (https://forum.tyflow.com)
+-- Forum: tyFlow Discussion (https://forum.tyflow.com/forum-1.html)
+--- Forum: Feature Requests (https://forum.tyflow.com/forum-4.html)
+--- Thread: Display Data operator: Force table (/thread-2216.html)
Display Data operator: Force table - TubeSmokeGuy - 02-12-2021
Hi!
I think it would be very helpful if the portions of all forces or velocity affecting components, which currently affect a particle can be shown in percent or portion of magnitude, separately.
For example:
Percent example:
ID: 1
Total force 100%:
Event 1 / Force 01 / Gravity: 15%
Event 1 / Force 01 / Wind01: 20%
Event 1 / Force 02 / Gravity: 0%
Event 1 / ParticleForce 01: 40%
Event 1 / Slow 01: 10%
Event 1 / Collission Bounce: 10%
Event 1 / Particle bind strength: 5%
Velocity magnitude example:
ID: 1
Total velocity magnitude: 5.0
Event 1 / Force 01 / Gravity: 2.0
Event 1 / Force 01 / Wind01: 0.5
Event 1 / Force 02 / Gravity: 1.0
Event 1 / ParticleForce 01: 0.25
Event 1 / Slow 01: 1.25
This can be very helpful to analyze the composition of your forces on a complex forces setup and help to adjust or balance forces.
I hope this makes sense in some way.
Thank you and greetings!
RE: Display Data operator: Force table - tyFlow - 02-12-2021
Unfortunately that's not possible.