11-02-2023, 10:43 AM
(This post was last modified: 11-02-2023, 10:50 AM by Yoogeen.
Edit Reason: additional screenshot
)
Hello everyone!
I'm trying to create eucalyptus branch with tyFlow. And have some issue with leave's orientation (I've never made plants with tyFlow before)
I achieved partial success on single branch (Screenshot 1). There are 4 leaves (temporary, later 2) with 90 deg rotation to each other and their orientation follows the trunk.
But everything goes wrong, when I turn ON the additional branches (Screenshot 2). Leave's orientation on branches doesn't follow the direction of branch, as on the trunk.
Please help me to fix it if you know the way.
On Screenshot 3 there is all the scheme
I also added the short video for better demonstration of how it works:
https://yadi.sk/i/QN8W-xI02Jx5Ew
This is what I need to achieve (additional screenshot):
https://yadi.sk/i/ZIxm_5Ux_IGtgQ
I'm trying to create eucalyptus branch with tyFlow. And have some issue with leave's orientation (I've never made plants with tyFlow before)
I achieved partial success on single branch (Screenshot 1). There are 4 leaves (temporary, later 2) with 90 deg rotation to each other and their orientation follows the trunk.
But everything goes wrong, when I turn ON the additional branches (Screenshot 2). Leave's orientation on branches doesn't follow the direction of branch, as on the trunk.
Please help me to fix it if you know the way.
On Screenshot 3 there is all the scheme
I also added the short video for better demonstration of how it works:
https://yadi.sk/i/QN8W-xI02Jx5Ew
This is what I need to achieve (additional screenshot):
https://yadi.sk/i/ZIxm_5Ux_IGtgQ