Hi Tim,
Unfortunately due to the shortage of 30XX cards there's nothing more that I can debug. I looked at your log but sadly the place it's freezing/crashing is related to CUDA, as opposed to somewhere else that I might have been able to look further into. I've thoroughly tested the CCCS on a wide range of non-30XX cards and none of them have presented issues (960ti, 1080ti, 2080ti, Quadro 8000, etc). So until I am able to get a 30XX card (which may be a long time at this point), my hands are tied.
If you need the CCCS, I would recommend downgrading to v0.16109, since that was the last build that used CUDA 10.2 which appears to be natively compatible with 30XX cards. The only issue is your 3ds Max startup time may be longer (1-2 minutes) since CUDA 10.2 requires JIT compilation during runtime (that's why I originally moved up to 11.2). More info about downgrading here:
http://docs.tyflow.com/faq/beta
Unfortunately due to the shortage of 30XX cards there's nothing more that I can debug. I looked at your log but sadly the place it's freezing/crashing is related to CUDA, as opposed to somewhere else that I might have been able to look further into. I've thoroughly tested the CCCS on a wide range of non-30XX cards and none of them have presented issues (960ti, 1080ti, 2080ti, Quadro 8000, etc). So until I am able to get a 30XX card (which may be a long time at this point), my hands are tied.
If you need the CCCS, I would recommend downgrading to v0.16109, since that was the last build that used CUDA 10.2 which appears to be natively compatible with 30XX cards. The only issue is your 3ds Max startup time may be longer (1-2 minutes) since CUDA 10.2 requires JIT compilation during runtime (that's why I originally moved up to 11.2). More info about downgrading here:
http://docs.tyflow.com/faq/beta