Ty Flow and Otoy Octane

[dv2000]

For some reason octane renders very slow when a bit of ty flow mesh particles are added.  Like in the image attached adding 10,000 simple mesh chunks turns rendering from 30 sec per frame to 2 min and 30 sec.  Thank you     

[dv2000]

octane network rendering and ty flow bug.

P.S. Most of our GPUs are slaves. It looks like when using TY Flow data travels very slow to slaves and by then master with 2 GPUs renders it in 2 min 30 sec. (When Ty flow is off slaves pick up and render in 30 sec per frame) If you look at the slaves' graph it is flat and barely any GPU load. I think tyflow and octane are not optimized well with network rendering and data transfer. All our connections are 10 Gb

2 GPU master with tyflow render time 2 min 30 sec
2 GPU master and 20 GPU slaves with tyflow render time 2 min 30 sec. SAME

2 GPU master and 20 GPU slaves (NO tyflow) render time 30 sec.


Slaves are at 100% GPU render power without tyflow and around 15-20 when tyflow is on