Display Data operator: Force table

[TubeSmokeGuy]

Hi!

I think it would be very helpful if the portions of all forces or velocity affecting components, which currently affect a particle can be shown in percent or portion of magnitude, separately.

For example:

Percent example:

ID: 1
Total force 100%:
 Event 1 / Force 01 / Gravity: 15%
 Event 1 / Force 01 / Wind01: 20%
 Event 1 / Force 02 / Gravity:   0%
 Event 1 / ParticleForce 01: 40%
 Event 1 / Slow 01: 10%
 Event 1 / Collission Bounce: 10%
 Event 1 / Particle bind strength: 5%


Velocity magnitude example:

ID: 1
Total velocity magnitude: 5.0
 Event 1 / Force 01 / Gravity: 2.0
 Event 1 / Force 01 / Wind01: 0.5
 Event 1 / Force 02 / Gravity:   1.0
 Event 1 / ParticleForce 01: 0.25
 Event 1 / Slow 01: 1.25


This can be very helpful to analyze the composition of your forces on a complex forces setup and help to adjust or balance forces.
I hope this makes sense in some way.

Thank you and greetings!